19
Ringing is switched off by adjusting the ring volume to zero. A "Ringer OFF" icon is shown in the display
during idle mode. The default ring volume is 3.
Ring Pattern
The ring pattern of an incoming call is changed by the following key sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the ▼ key four times.
>RING PATTERN
AUTO ANSWER
3) Press PROG to enter the ring pattern sub-menu.
>EXTERNAL
INTERNAL
4) Press the PROG key to choose external ring pattern setting.
EXT RING PATTERN
0
5) Enter 0 to 9 , or adjust using ▼/▲ keys. The selected ring pattern is played for you.
EXT RING PATTERN
4
6) Press PROG to confirm the setting. The display will return to:
>EXTERNAL
INTERNAL
The default external ring pattern is 0.
Auto Answer
With Auto Answer ON, you can answer a call by simply removing the Handset from the Base Unit.
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the ▼ key five times.
>AUTO ANSWER
KEY CLICK
3) Press PROG to enter the auto answer sub-menu.
AUTO ANSWER
OFF
4) Enable auto answer by pressing 1 or ▲, or disable auto answer by pressing 0 or ▼.
AUTO ANSWER
ON
5) Press PROG to confirm the setting. The display will return to:
>AUTO ANSWER
KEY CLICK
Auto answer is disabled by default.
Key Click
When the key click option is enabled, any key press generates a click sound, except when the keypad is locked.
To access the Key Click option:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the ▼ key six times.
>KEY CLICK
KEY LOCK
3) Press PROG to enter the key click sub-menu.
KEY CLICK
ON