Alienware M14X service manual Replacing the Status-Light Board

1 status-light board 2 screw

Replacing the Status-Light Board

1.Follow the instructions in Before You Begin.

2.Align the slot on the status-light board with the alignment post on the palm rest assembly.

3.Replace the screw that secures the status-light board to the palm-rest assembly.

4.Route the status-light board cable through the routing guides on the palm- rest assembly.

5.Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly).

6.Replace the keyboard (see Replacing the Keyboard).

7.Replace the center-control cover (see Replacing the Center-Control Cover).

8.Replace the battery pack (see Replacing the Battery Pack).

9.Replace the base cover (see Replacing the Base Cover).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

Back to Contents Page