Alliance Laundry Systems 25, P/N 70400201 24

Maintenance

WARNING

To reduce the risk of electric shock, fire, explosion, serious injury or death:

•Disconnect electric power to the tumbler before servicing.

•Close gas shut-off valve to gas tumbler before servicing.

•Close steam valve to steam tumbler before servicing.

•Never start the tumbler with any guards/panels removed.

•Whenever ground wires are removed during servicing, these ground wires must be reconnected to ensure that the tumbler is properly grounded.

W002

TMB2121N

1 TMB2121N

TMB2116N

	25, 30 AND 35 POUND		T30
1	Lint Screen	4	Thermistor
2	Guard	5	Blower Housing

3Cabinet Thermostat

Figure 7

70400201

Contents

Keep These Instructions for Future Reference (If this machine changes ownership, this manual must accompany machine.) www.comlaundry.com Part No September Page In the U.S.A In Canada In Australia •WHAT TO DO IF YOU SMELL GAS: –Do not try to light any appliance Notes Table of Contents Page Introduction Customer Service Wiring Diagram Serial Plate Location Safety Information Important Safety Instructions Save These Instructions 1.Read all instructions before using the tumbler GROUNDING INSTRUCTIONS 6.Do not reach into the tumbler if the cylinder is revolving Page Page Operating Instructions Electromechanical Coin Control CD and CX Control Suffixes Manual Timer MT Control Suffix Diagnostic Microprocessor Control General Operation Default Programs Features DMP Coin DV Control Suffix Description of The Coin Control Panel DMP Coin Features DMP OPL Models DO Control Suffix Description of the OPL Control Panel DMP OPL Features Programming Reversing Operation Rotation Sensor Safety Tumble/Anti-Wrinkle Operational Check for the Board Diagnostics Maintenance Page Monthly Quarterly Bi-Annually Daily Maintenance Monthly Maintenance Quarterly Maintenance Bi-AnnuallyMaintenance Before You Call for Service