Before You Call for Service

 

 

 

 

 

Won’t

Won’t

 

ClothesPossible Reason – Corrective Actions
Start

Heat

 

Not Dry

 

 

 

 

 

 

 

 

 

 

Insert correct coin(s) or valid card if applicable.

 

 

 

 

 

 

 

 

Close the loading door tightly.

 

 

 

 

 

 

 

 

Close lint panel tightly.

 

 

 

 

 

 

 

 

Press the PUSH TO START button.

 

 

 

 

 

 

 

 

Be sure power cord is plugged all the way into the electrical outlet.

 

 

 

 

 

 

 

 

Drying timer is in OFF position.

 

 

 

 

 

 

 

 

Check the main fuse and circuit breaker.

 

 

 

 

 

 

 

 

Check fuses located in the machine.

 

 

 

 

 

 

 

 

Insufficient airflow.

 

 

 

 

 

 

 

 

Gas shut-off valve in OFF position.

 

 

 

 

 

 

 

 

Are controls properly set?

 

 

 

 

 

 

 

 

Broken drive belt. Call the service person.

 

 

 

 

 

 

 

Tumbler is in Cool Down Mode.

 

 

 

 

 

 

 

Lint screen clogged. Clean lint screen.

 

 

 

 

 

 

 

Exhaust duct to outside is blocked. Clean out.

 

 

 

 

 

Customer Service

If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950 for the name and address of the nearest authorized parts distributor.

For technical assistance, call (920) 748-3121.

70400201

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

26