Operating Instructions
DMP OPL Models
DO Control Suffix
Description of the OPL Control Panel
Refer to Figure 7.
4
3
5
1
2
3
4
5
6
DRYING
COOLING
7
5
TEMPERATURE
REV START STOP
(CANCEL)
8
9 10
1 2
TMB1956N
TMB1956N
1START. Starts or resumes the current program or cycle.
2STOP. Temporarily halts the current cycle or cancels the current program.
3Up/Down Arrows. Increases or decreases the value in the display. In conjunction with the DISPLAY button, these buttons are used to adjust the drying time, cooling time, temperature, clockwise time, dwell time,
4Display. Displays the drying time, cooling time, drying temperature and diagnostic codes.
5User Program LEDs. Illumination shows which user program is currently being displayed.
6Program Select. This button toggles through the five user programmable programs. Holding this button will save a program, as indicated in Programming.
7Display Select. Toggles the display between the drying time, cooling time, and temperature settings. Pressing the Display button for 3 seconds allows the user to display the drying cycle temperature.
8DRYING LED. Illuminated when in the drying cycle.
9COOLING LED. Illuminated when in the cooling cycle, or when the display is currently showing the time for the cooling cycle.
10TEMPERATURE LED. Illuminated when the display is showing the temperature setting.
Figure 7
16 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 70400001 |