Alliance Laundry Systems 70420801 Position and Level the Tumble Dryer, Make-Up Air

Position and Level the Tumble Dryer

The tumble dryer may be moved with or without the skid. To remove the skid, unscrew the four shipping bolts, and discard them.

To fit a 200 pound tumble dryer (with shipping skid) through an 8 foot (2.43 meters) high door, you must remove the front access panel. The upper 3 inches (76 mm) of the stove must also be removed on

200 pound gas tumble dryers. Removing the entire gas or steam heater assembly and the shipping skid will reduce the height to 75 inches (1905 mm).

Level the tumble dryer to within 0.125 inch (3 mm) from front-to-rear (level on cylinder rib), and side-to- side (level on top panel). Shim under corners to level and stabilize unit. Tumble dryer must not rock.

Make-Up Air

Required Make-Up Air Opening

(to the outside) for Each Tumble Dryer

Models		Opening
200 Pound		525 in.2 (3710 cm2)
		free air
	Table 1

Page 6 of 12

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT