Steam Requirements

SUPPLY

TMB2024N

NOTE: Refer to Table 6 for sizing of steam lines. Piping must also be sized accordingly for length of runs and number

of elbows.
1	Risers 12 in. (305 mm)	6	18 in. Drop (457 mm)
2	Shut-Off Valve	7	Steam Bonnet
3	Check Valve	8	Solenoid Valve (Supplied with machine)
4	Vacuum Breaker (optional)	9	Union
5	Condensate Return Line from Supply Line	10	Trap with Built-In Strainer

Figure 3

* Based on maximum psi.

Table 6

Page 11 of 12

Image 11

Contents

Part No September SubjectModel Identification Steam Coil Rating at 100 psigBoiler Horsepower Btu/hr Cylinder Capacity dry weight Pounds kgGas Models Net Weight approximate Pounds kg Steam Models Net Weight approximate Pounds kg Exhaust Outlet Dimensions and Locations Models 200L/N/S Pound Tumble Dryer Dimensions and Exhaust Outlet LocationsCabinet Dimensions Models 200L/N/S 200L/N Electric and Gas Connection Locations for Gas ModelsModels Electrical Connection Gas Connection Models Electrical Connection 200S Electric and Steam Connection Locations for Steam ModelsModels Steam Inlet Diameter 200S Make-Up Air Position and Level the Tumble Dryer Duct Pound Stations Mm Duct ONE Manifold AssemblyExhaust Requirements TWO Manifold Assemblies Gas Rate Feet Inches Quantity Gas RequirementsHigh Altitude Orifice Sizing Non-CE Models Altitude Orifice New Electrical Requirements Supply Return Steam RequirementsSteam Pressure Pounds Condensate/Hour Belt Drive Loading Door Strike