Exhaust Requirements

F E

D C

B A

ONE MANIFOLD ASSEMBLY

			TMB2019N
1	NOTE: Where the exhaust duct pierces a	2	Outlet Duct Diameter
	combustible wall or ceiling, the opening	3	45° Typical
	MUST be sized per local codes.	3	45° Typical
	MUST be sized per local codes.

		Figure 1

	Duct		200 Pound
	Stations		12 in. (305 mm) Duct
			12 in. (305 mm) Duct

	A		12 in. (305 mm)

	B		17 in. (432 mm)

	C		21 in. (533 mm)

	D		24 in. (610 mm)

	E		27 in. (686 mm)

	F		30 in. (762 mm)

	G		32 in. (813 mm)

	H		34 in. (864 mm)

	I		36 in. (914 mm)

	J		38 in. (965 mm)

	K		40 in. (1016 mm)

	L		42 in. (1067 mm)

Table 2

Page 7 of 12

Image 7

Contents

Model Identification SubjectPart No September Steam Coil Rating at 100 psigBoiler Horsepower Btu/hr Cylinder Capacity dry weight Pounds kgGas Models Net Weight approximate Pounds kg Steam Models Net Weight approximate Pounds kg Cabinet Dimensions Models 200L/N/S Pound Tumble Dryer Dimensions and Exhaust Outlet LocationsExhaust Outlet Dimensions and Locations Models 200L/N/S Models Electrical Connection Gas Connection Electric and Gas Connection Locations for Gas Models200L/N Models Steam Inlet Diameter 200S Electric and Steam Connection Locations for Steam ModelsModels Electrical Connection 200S Make-Up Air Position and Level the Tumble Dryer Exhaust Requirements ONE Manifold AssemblyDuct Pound Stations Mm Duct TWO Manifold Assemblies Gas Rate Feet Inches Quantity Gas RequirementsHigh Altitude Orifice Sizing Non-CE Models Altitude Orifice New Electrical Requirements Supply Return Steam RequirementsSteam Pressure Pounds Condensate/Hour Belt Drive Loading Door Strike