Alliance Laundry Systems 70420801 installation manual Loading Door Strike, Belt Drive

Loading Door Strike

The loading door strike must be adjusted to have sufficient tension to hold loading door closed against force of load tumbling against it. Proper adjustment is when 8-15 pounds (35.6-66.7 N) pull is required to open door.

If adjustment is required, refer to Figure 4 and proceed as follows:

To adjust, open door, loosen adjustment screws and position strike for desired magnet engagement. retighten screws.

Belt Drive

NOTE: Proper tensions for new belts are

45-55 pounds for the motor belt, 55-65 pounds for the final drive and 65-70 pounds for 200 pound blower, measured with a Borroughs Belt Tension Gauge. Using a Browning Belt Tension Gauge, the motor belt deflection should be 0.31 inch at five pounds pressure, and final drive belt deflection should be 0.25 inch at five pounds pressure.

1

2

TMB2359N

1Door Strike

2Adjustment Screws

Figure 4

Page 12 of 12

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT