Alliance Laundry Systems B-Series Display Indicators, Display, Meaning, Operation

Operation

Table 2 lists the various displays and what they mean. The operator should become familiar with these machine displays.

Display	Meaning

tESt	Diagnostic test cycle selected or enabled

SPIn	Spin (extract) step

SUP1	Supply signal 1 (“S1” output), normally detergent

SUP2	Supply signal 2 (“S2” output), normally bleach

SUP3	Supply signal 3 (“S3” output), normally softener

SUP4	Supply signal 4

SUP5	Supply signal 5

SdLY	Spin coast (motor coasts after high speed extract)

CFIL	Cold Fill

HFIL	Hot Fill

bFIL	Warm Fill (cold + hot)

bLCH	Control will also light “add bleach” indicator

PASS	Variable-speed ONLY – balance “PASS” condition; shows in “test” cycle only

FAIL	Variable-speed ONLY – balance “FAIL” condition; shows in “test” cycle only

bAL?	Variable-speed ONLY – meaning: “Do you wish to enter balance detection test routine?”

CY__	Cycle number (followed by a space and number 1 through highest cycle number)

norn	Normal agitation selected

gEnt	Gentle (reduced) agitation selected

SPn1	Variable-speed ONLY – low spin speed (the lower of 2 spin speeds)

SPn2	Variable-speed ONLY – high spin speed (the higher of 2 spin speeds)

For	Wash speed forward (during test cycle)

rEv	Wash speed reverse (during test cycle)

dISt	Variable-speed ONLY – distribution speed (during test cycle)

LO	Low water level

nEd	Medium water level

HI	High water level

CEL	Display all temperatures in degrees Celsius

FAr	Display all temperatures in degrees Fahrenheit

___C	The first 3 digits are reserved for temperature reading, C indicates “degrees Celsius”

	Table 2 (Continued)

F232219