Alliance Laundry Systems B-Series Maintenance, Daily, Beginning of Day, End of Day, after each completed cycle, after each completed cycle

Maintenance

WARNING

Sharp edges can cause personal injury. Wear safety glasses and gloves, use proper tools and provide lighting when handling sheet metal parts.

W366R1

IMPORTANT: Replace all panels that are removed to perform service and maintenance procedures. Do not operate the machine with missing guards or with broken or missing parts. Do not bypass any safety devices.

Daily

IMPORTANT: Door lock should be checked daily to ensure proper operation. Also check that all safety and instruction stickers are on the machine. Any missing or illegible safety instructions stickers should be replaced immediately.

Beginning of Day

1.Inspect water inlet valve hose connections on the back of the machine for leaks.

2.Inspect steam hose connections for leaks (where applicable).

3.Verify that insulation is intact on all external wires and that all connections are secure. If exposed wire is evident, call a service technician.

4.Check door interlock before starting operation:

a.Attempt to start the machine with the door open. The machine should not start with the door open.

b.Close the door without locking it and attempt to start the machine. The machine should not start with the door unlocked.

c.Close and lock the door, and start a cycle. Attempt to open the door while the cycle is in progress. The door should not open.

If the door lock and interlock are not functioning properly, call a service technician.

End of Day

1.Clean the door gasket of residual detergent and all foreign matter.

2.Clean automatic supply dispenser lid and general area. Flush dispenser with clean water.

3.Clean the machine’s top, front and side panels with mild detergent. Rinse with clean water.

4.Leave loading door open at the end of each day to allow moisture to evaporate.

NOTE: Unload the machine promptly after each completed cycle to prevent moisture buildup. Leave loading door open after each completed cycle to allow moisture to evaporate.

F232219