Alliance Laundry Systems B-Series For 80 pound capacity models only

Maintenance

1

2

H047I

1Bearing Grease Fitting

2Seal Grease Fitting

Figure 11

2.For 80 pound capacity models only, lubricate bearings and seals each month OR after every 200 hours of operation. Refer to Figure 11.

a.Use a premium-grade lithium-based #2 grease. Never mix two types of grease, such as petroleum and silicone.

b.Pump the grease gun slowly, permitting only the following number of strokes:

●Bearing grease fitting, 2 strokes

●Seal grease fitting, 1 stroke

Do not pump the grease gun until grease comes out of the bearing housing. This can result in overlubrication, causing damage to bearings and seals.

18 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232219