Alliance Laundry Systems CHM1766C 13

			Programming
		Table 2 (continued)

Supply	SUP0		SUP0 for No Supply or Supply 1- 7 (Refer to Table 3 for
			operation of each supply selection)
	SUP1		operation of each supply selection)
	SUP1

	SUP2

	SUP3

	SUP4

	SUP5

	SUP6

	SUP7

Heat (Models with heat or heat capability)	HEAt		00F (no heat for segment) or 75oF to 200oF
			00C (no heat for segment) or 25oC to 93oC
	noHt		00C (no heat for segment) or 25oC to 93oC
	noHt

Drain (Final segment drains in stop	drAI		Drain or No Drain (if No Drain programmed, will skip spin
routine if No Drain is programmed)			segment associated with Drain segment )
routine if No Drain is programmed)	nodr		segment associated with Drain segment )
	nodr

Spin time	SPIn		00 for No Spin or 60-240 seconds (increases/decreases in
			one-second increments)

Rinse 6 (displayed as “rIn6”)

Time for Agitation (excludes fill, drain,	AG1		0 or 2-30 minutes in agitation step (increases/decreases in
spin and heat)			one-minute increments). Refer to Table 4 for operation of
spin and heat)	AG2		one-minute increments). Refer to Table 4 for operation of
	AG2		each agitation segment

	AG3
	AG3

	AG4

Fill valves (temperature)	CFIL		Cold, Hot or Both (warm) water fills or Auxiliary fill

	HFIL

	bFIL

	AFIL

Fill water level control	LO		Low, Medium or High water level

	nEd

	HI

Supply	SUP0		SUP0 for No Supply or Supply 1- 7 (Refer to Table 3 for
			operation of each supply selection)
	SUP1		operation of each supply selection)
	SUP1

	SUP2

	SUP3

	SUP4

	SUP5

	SUP6

	SUP7

Heat (Models with heat or heat capability)	HEAt		00F (no heat for segment) or 75oF to 200oF
			00C (no heat for segment) or 25oC to 93oC
	noHt		00C (no heat for segment) or 25oC to 93oC
	noHt

Drain (Final segment drains in stop	drAI
routine if No Drain is programmed)
routine if No Drain is programmed)	nodr
	nodr

Spin Speed (displayed as SPn1-SPn3)

Spin time	SPIn		1-10 minutes (increases/decreases in one-minute
			increments)

		Table 2

F232224