4.Tighten all connections securely. Turn on gas and check all pipe connections (internal & external) for gas leaks with a non-corrosive leak detection fluid.

NOTE: The dryer and its appliance main gas valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi (3.45 kPa). Refer to Step 12 (Check Heat Source).

L.P. (Liquefied Petroleum) Gas, 2500 Btu/ft3

(93.1 MJ/m3) service must be supplied at 10 ± 1.5 inch water column pressure.

For proper operation at altitudes above 3000 feet

(915 m) the L.P. gas valve spud orifice size must be reduced to ensure complete combustion. Refer to Table 2.

L.P. Altitude Adjustments

Altitude

 

Orifice Size

 

Part No.

 

 

 

 

 

 

 

feet

m

No.

 

inches

 

mm

 

 

 

 

 

 

 

 

 

 

 

3000

915

55

 

0.0520

 

1.32

58755

 

 

 

 

 

 

 

 

8000

2440

56

 

0.0465

 

1.18

503786

 

 

 

 

 

 

 

 

Table 2

NOTE: DO NOT connect the dryer to L.P. Gas Service without converting the gas valve. Install L.P. Gas Conversion Kit 649P3, available at extra cost.

Step 6: (Electric Dryer Only) Connect Electrical Plug

NOTE: Model LTSA7A*N2989 - A single electrical connection serves both washer and dryer.

Dryer requires 120/240 Volt or 120/208 Volt, 60 Hertz, 3 or 4 wire electrical supply. Refer to serial plate for specific electrical requirements.

NOTE: The wiring diagram is located behind the control panel, inside the control cabinet.

WARNING

To reduce the risk of fire, electric shock, serious injury or death, all wiring and grounding MUST conform with the latest edition of the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1, and such local regulations as might apply. It is the customer’s responsibility to have the wiring and fuses installed by a qualified electrician to make sure adequate electrical power is available to the dryer.

W521

802715

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

11

Page 11
Image 11
Alliance Laundry Systems Dishwasher Electric Dryer Only Connect Electrical Plug, Liquefied Petroleum Gas, 2500 Btu/ft3

Dishwasher specifications

Alliance Laundry Systems is renowned for its commitment to quality and innovation in the field of commercial laundry and cleaning solutions. Among its impressive lineup, the Alliance Dishwasher stands out as a robust solution designed for heavy-duty performance, suited for commercial kitchens and establishments requiring efficient cleaning of dishware, glassware, and utensils.

One of the main features of Alliance Dishwashers is their exceptional cleaning capabilities. Equipped with advanced wash systems, these dishwashers effectively utilize high-pressure jets and strategically placed spray arms to ensure thorough washing, targeting every corner of the items being cleaned. The result is spotless dishes with minimal remaining contaminants, enhancing hygiene standards in any food service environment.

The technology behind Alliance Dishwashers incorporates intelligent controls that simplify operation. With user-friendly interfaces, staff can easily select from multiple washing cycles tailored to different types of loads. This versatility allows businesses to optimize energy consumption and water usage, contributing to lower operational costs while maintaining top-notch cleaning performance.

In terms of speed, Alliance Dishwashers are engineered for rapid turnarounds, often completing washing cycles in under five minutes. This feature is particularly beneficial for high-volume settings where efficiency is paramount. Additionally, many models include a built-in heat exchanger that efficiently manages water temperatures, fostering compliance with sanitation requirements and enhancing the effectiveness of the cleaning process.

Durability is another critical characteristic of Alliance Dishwashers. Constructed with high-quality stainless steel, these units resist corrosion, withstand the rigors of continual use, and maintain their appearance over time. This not only ensures longevity but also supports the maintenance of a pristine kitchen environment which is vital in the hospitality sector.

Energy efficiency is at the core of the Alliance Dishwasher design. Many models are ENERGY STAR certified, consuming less water and electricity while delivering powerful performance. This focus on sustainability not only helps businesses reduce their environmental footprint but also leads to significant cost savings.

In conclusion, the Alliance Dishwasher combines state-of-the-art technology, user-friendly features, and robust construction to meet the demands of modern commercial kitchens. From its powerful cleaning capabilities and rapid cycle times to its energy-efficient operation, the Alliance Dishwasher is an invaluable asset for any food service operation aiming for excellence in sanitation and efficiency.