Installation

1 2 3 4 5 6

1 2 3 4 5 6

1 2 3 4 5 6

UPPER/SINGLE UPPER/SINGLE UPPER/SINGLE

H3

 

 

 

 

LOWER

H3

 

 

 

 

LOWER

H3

 

 

 

 

LOWER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

5

4

3

2

1

6

5

4

3

2

1

6

5

4

3

2

1

SINGLE UNIT

CONTROL1

1 2 3 4 5 6

UPPER/SINGLE

H3

LOWER

 

66

55 4 3 2 1

1 2 3 4 5 6

UPPER/SINGLE

H3

LOWER

 

 

66 5 4 3 2 11

1 2 3 4 5 6

UPPER/SINGLE

H3

LOWER

 

66

55 4 3 2 1

NOTE: For stacked units, wire must be run from the top connector to the bottom connector before moving on to the next machine.

STACKED UNIT

TERMINATING

RESISTOR

CONTROL2

Figure 7

D. Connecting the Repeater to the PC

Refer to Figure 8

1.Attach one of the 210150 Network Cables to segment 1 of the repeater.

2.Connect the RED and BLACK wires of that Network Cable to the terminal strip coming from the computer (RED to RED and BLACK to BLACK). Do not connect the GREEN wire.

3.When repeater is used with a desktop PC, the bias resistor in the repeaater must be removed. Open the repeater and remove jumpers J3 and J4. Refer to the manual included with the repeater for specific instructions.

NOTE: Ensure that only the bias resistors that correspond to segment one (PC connection) are removed.

4.Connect one of the 210150 Network Cables to segment 2 of the repeater.

5.Connect the RED and BLACK wires of that Network Cable to the terminal strip going out to one leg of the network (RED to RED and BLACK to BLACK). Do not connect the GREEN wire.

6.Terminate the last machine on this leg with a 120 Ohm 1/2 Watt resistor.

NOTE: Up to 124 nodes may be connected to any given segment coming off the repeater. A total of 250 nodes may be connected to the network.

7.Repeat steps 4 – 6 for the remaining 2 segments as required. There is no need to connect a cable or a terminating resistor to an unused segment on the repeater.

8.Connect the bayonet style connector of the wall adapter to the 12 VDC input on the repeater.

9.Connect the wall adapter to a 120 VAC 60 Hz. outlet.

12

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

505942