![Grounding Instructions](/images/new-backgrounds/24963/2496327x1.webp)
Installation
Grounding Instructions
The washer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
The washer is equipped with a cord having an
WARNING
Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the washer is properly grounded.
W327
•DO NOT modify the plug provided with the washer – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
•If the laundry room’s electrical supply does not meet the above specifications and/or if you are not sure the laundry room has an effective ground, have a qualified electrician or your local electrical utility company check it and correct any problems.
WARNING
Any disassembly requiring the use of tools must be performed by a suitably qualified service person.
W299
Step 7: Add Water to the Washer
To prevent damage to pump, do not run washer before adding at least one quart water to the tub. If the washer is run before any water is added, the pump seal may overheat, causing the pump to leak. Once installed, the water retained in the drain system from the previous cycle will provide sufficient cooling to prevent pump seal damage.
NOTE: The agitator should not be removed except for service. The washtub is designed to be self- cleaning.
TLW2056N
TLW2056N
Figure 11
Step 8: Check Lid Switch
Washer should stop filling, agitating and spinning when lid is opened.
TLW2101N
Figure 12
Step 9: Check Installation
Refer to Installer Checklist on the back cover of this manual and make sure that washer is installed correctly.
Run washer through one complete cycle to make sure it is operating properly.
12 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 202068 |