Installation
Before You Start
Tools
For most installations, the basic tools you will need are:
12 
3
4
D074I
D074I
1Wrench
2Screwdriver
3Pliers
4Level
Installing the Washer
Step 1: Remove the Shipping Brace and Shipping Plug
Remove the shipping brace from under the lid.
The shipping plug will be released from the base of the washer when removing the cardboard base from the washer. Refer to Figure 2.
The shipping brace and plug should be saved and must be reinstalled whenever washer is moved or transported to a new location. This will prevent damage to washer components.
Do not tilt washer to front or sides when moving.
Refer to
Figure 1
NOTE: If the washer is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate it until the washer has had a chance to warm up.
IMPORTANT: Install dryer before washer. This allows room for attaching exhaust duct.
1 
3
1Shipping Brace
2Shipping Plug
3Cardboard Base
2
TLW2
TLW2098N
Figure 2
6 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 202068 |
