Vending

Meter Case

The factory mounted coin meter case does not include the service door lock, coin drawer, coin drawer lock or keys. These parts must be ordered (at extra cost) according to the purchaser’s requirements direct from the manufacturer of your choice.

NOTE: On models with standard capacity meter case and high capacity meter case models starting with Serial Nos. beginning 1010, you have the option of using a screw type lock or a 1/4 turn lock on the meter case service door. If you choose to use a screw lock, then the special bracket (located inside the meter case) must be used. DO NOT use the special bracket if a 1/4 turn lock is used. High capacity meter case models with Serial Nos. beginning 0910 through 1010 use 1/4 turn lock only.

Coin Drawer Security (Models with Standard Capacity Meter Case and high capacity meter case models starting with Serial Nos. beginning 1010 Only) – For additional security, drill out the two pilot holes on each side of the front of the meter case to 1/4 or 5/16 inch (6.4 or 7.9 mm) holes and install a bicycle lock through these holes.

NOTE: An 8 in. (20.32 cm) coin drawer is required for models with standard capacity meter case and high capacity meter case models starting with Serial Nos. beginning 1010. High capacity meter case models with Serial Nos. beginning 0910 through 1010 require a 7.21 in. (18.31 cm) coin drawer.

Installation

Models Prepped for Card Reader

The machine is shipped from the factory with the Electronic Control Diagnostic Harness Assembly unplugged. To avoid unauthorized manual programming or vending, perform the following steps.

1.Open control panel. Refer to Figure 13.

2.Locate diagnostic harness on electronic control.

3.Plug connectors for “white/black” wire and “red/ blue” wire together.

 

1

 

FLW6R

1

Control Panel

Figure 13

202068

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

13

Page 14 Page 16
Page 15
Image 15
Alliance Laundry Systems TLW12CTLW12C manual Vending, Meter Case, Models Prepped for Card Reader
Page 14 Page 16

TLW12CTLW12C specifications

Alliance Laundry Systems TLW12CTLW12C is a highly efficient and robust washer-extractor that exemplifies modern engineering in commercial laundry equipment. Designed primarily for high-demand settings such as laundromats, hotels, and large institutions, this model stands out due to its advanced features and exceptional performance.

One of the prominent features of the TLW12CTLW12C is its large capacity, allowing users to process significant loads of laundry in a single cycle. With a drum that can accommodate up to 12 kilograms of laundry, this washer-extractor ensures fewer loads and enhanced productivity, which can greatly benefit businesses aiming to optimize their operations.

The TLW12CTLW12C is equipped with a powerful motor that delivers high extraction speeds, leading to reduced moisture content in the laundry after each cycle. This efficiency translates into shorter drying times, ultimately conserving energy and reducing operational costs. The machine's design also features a robust suspension system that minimizes vibrations, ensuring quiet and stable operation even at full load.

In terms of technology and user control, the TLW12CTLW12C boasts a user-friendly digital control interface, allowing operators to easily select from a wide range of programmable wash cycles tailored for various fabrics and soil levels. This versatility is essential for achieving optimal cleaning results across different textile types, from delicate items to heavily soiled linens.

Another significant characteristic of the TLW12CTLW12C is its energy efficiency. This model is designed with advanced water and energy-saving technologies that not only reduce consumption but also promote environmentally-friendly practices. Additionally, it features automatic water level control and temperature regulation, ensuring consistent wash quality while further minimizing resource usage.

Durability is a pivotal feature of the TLW12CTLW12C, which is constructed from high-quality materials intended to withstand the rigors of commercial usage. The stainless-steel drum and outer construction are resistant to rust and corrosion, ensuring a long lifespan with minimal maintenance.

Overall, the Alliance Laundry Systems TLW12CTLW12C is designed to meet the demanding needs of commercial laundry operations with its blend of capacity, efficiency, flexibility, and durability. Its innovative features make it a worthy investment for those seeking reliable performance in laundry management.
Top Page Image Contents