Allied Telesis 86241-02

Patch 86241-02 For Rapier Switches and AR800 Series Modular Switching Routers 3

Patch 86241-02 for Software Release 2.4.1

C613-10340-00 REV B

The following issues have been resolved:

• The RESET PIM INTERFACE=VLAN command was not working

correctly.

• Packets with Time to Live (TTL) set to less than 4 were not being

forwarded.

• VLAN tags were not being inserted into IP multicast packets on multi-

tagged ports.

• A fatal error occurred when PIM and RIP were both running.

ARL message interrupts have been re-enabled after a software table rebuild

to fix synchronisation of the software forwarding database with the

hardware table.

The CREATE CONFIG command did not save the SOURCEPORT

parameter to the configuration file when the low value of the source port

range was set to zero. This issue has been resolved.

Report sending and default routes were not working correctly. Also, the

SHOW CONFIGURATION DYNAMIC and SHOW

CONFIGURATION=DVMRP commands were not working correctly. These

issues have been resolved.

TELNET sessions are now closed with “^D” only when the session is in the

DHCP now processes Discover messages smaller than 300 bytes.

IPSec no longer logs packets that match an ACTION=ALLOW policy. The

overhead of this logging was affecting non-IPSec traffic.

The LOCALRSAKEY parameter in the CREATE ISAKMP POLICY and SET

ISAKMP POLICY commands was not accepting the value zero. This issue

has been resolved.

The PURGE IPSEC command caused a fatal error. This issue has been

resolved.

PCR: 02272 Module: IPG, PIM, SWI Network affecting: No

PCR: 02274 Module: TPAD Network affecting: No

PCR: 02276 Module: FIREWALL Network affecting: No

PCR: 02277 Module: DVMRP Network affecting: No

PCR: 02280 Module: TELNET, TTY Network affecting: No

PCR: 02291 Module: DHCP Network affecting: No

PCR: 02292 Module: IPSEC Network affecting: No

PCR: 02294 Module: IKMP Network affecting: No

PCR: 02298 Module: IPSEC Network affecting: No