Allied Telesis 86241-02 manual PCR Module Trace Network affecting No

8 Patch Release Note

PCR: 02399 Module: TRACE Network affecting: No

The Trace utility has been modified. Previously, Trace sent a group of packets at once and waited for multiple responses in order to assess the minimum, maximum and average time to cover a certain "hop distance" towards the target host. Now Trace sends each packet in each group individually, and waits either for a response or a time-out before sending the next packet in the group.

PCR: 02401 Module: IPV6 Network affecting: No

Neighbour discovery and PIM6 caused a fatal error when IPv6 was not enabled, or when the IPv6 feature license was not present. This issue has been resolved.

PCR: 02402	Module: SNMP, CORE, SHOW, Network affecting: No
	FILE

SNMP MIB support has been enhanced for CPU utilisation and file statistics. MIB support has been added for Allied Telesyn contact details and fast buffers.

PCR: 02403 Module: STP Network affecting: No

A watchdog timeout occurred when the command ENABLE STP PORT was executed. This issue has been resolved.

PCR: 02406 Module: IPV6 Network affecting: No

A Router-Alert option has been added. Also, the SHOW IPV6 MLD

INTERFACE command now works correctly.

PCR: 02409 Module: IPG Network affecting: No

A warning now appears when the DELETE IP INTERFACE command is executed before the DELETE DVMRP INTERFACE command.

PCR: 02410 Module: VRRP Network affecting: No

VRRP pre-empt mode was not working with advertisement updates of 1 second or more because this did not allow for interface start time on startup. Now a check is made to verify that interfaces are UP before timers are started.

PCR: 02411 Module: IPV6 Network affecting: No

The SHOW TCP command was not showing the listening status for IPv6.

PCR: 02412 Module: IPV6 Network affecting: No

An ISDN call was activated by IPv6 Router Advertisements over IPv6 tunnel interfaces. This issue has been resolved.

PCR: 02415 Module: IPG Network affecting: No

Packets with a RIP source address and next hop address that are not on the same subnet as the interface will now be processed. If the received next hop is not on the same subnet, it is treated as 0.0.0.0.

Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B