Allied Telesis AR44xS series manual CR00012620, Bridging, CR00012692

Features in 276-02

53

CR

Module

Level

Description

AR44xS / AR450S

AR7x5

AR750S

Rapier i

AT-8800

AT-8600

AT-8700XL

AT-8948

AT-9900

AT-9800

CR00012620

Bridging

-

By default, when the router receives a tagged packet on an Eth or VLAN interface

Y

Y

Y

-

-

-

-

-

-

-

and bridges it, the bridge strips out the packet’s VLAN tag. This enhancement

enables you to set the bridge to instead retain the tag, by using off, no or false

in the new command:

set bridge stripvlantag={onoffyesnotruefalse}

The default is on. To see whether stripping is turned on or off, use the command:

show bridge

and check the new StripVlantag entry.

CR00012692

L2TP

-

The connection between the router or switch, acting as an LNS, and a third party

Y

Y

Y

Y

Y

-

-

Y

Y

Y

peer, acting as an LAC, can sometimes fail during PPP link negotiation. Frequent

negotiation failures can indicate a compatibility problem between the third party

peer and Proxy Authentication responses from the router or switch. With this

enhancement, you can now disable Proxy Authentication on the router or switch

for situations where the third party equipment is not compatible. Use

proxyauth=off in the command:

add l2tp ip=ipadd[-ipadd] ppptemplate=0..31

[number={offonstartup}] [pre13={offon}]

[proxyauth={offon}]

[tosreflect={offonfalsetruenoyes}]

The default for proxyauth is on. Proxy Authentication should not be disabled

unless necessary.

To see whether Proxy Authentication is turned on or off, use the command:

show l2tp ip

and check the new Proxy Authentication entry.

Version 276-05

C613-10474-00 REV D