34

AR700 Series Router

power cycle, the dynamic configuration must be saved as a configuration script, using the create config command.

When the router starts up following either a power cycle or an operator- initiated reboot (using the restart command), it performs the following sequence of operations:

1.Perform start-up self tests.

2.Load the flash boot block version as the INSTALL boot into the router’s RAM.

3.Prompt the manager for changes to the default start-up procedure:

Force EPROM download (Y)?

The manager may press one of the keys listed in Table 4 on page 35 to override the default installation procedure.

4.Check the INSTALL information to determine which version to load and run, according to the INSTALL parameters, and the manager’s response to the previous prompt. If none of the keys in Table 4 on page 35 are pressed, the INSTALL parameters determine which version and patch are loaded and run.

5.Load the required version specified by the INSTALL parameters from the flash file system as the main boot.

6.Start the router.

7.Execute the boot configuration script, if one has been configured. (The boot configuration script is either a configuration file set using the set config command from the Managing Configuration Files and Software Versions chapter, or the file boot.cfg file, if there is one.)

A series of start-up messages is sent to asyn0 (the console or terminal port).

Figure 11: Example of router start-up messages on an AR750S

INFO: Self tests beginning.

INFO: RAM test beginning.

PASS: RAM test, 65536k bytes found.

INFO: Self tests complete

INFO: Downloading router software. Force EPROM download (Y) ?

INFO: Initial download successful

INFO: Initialising Flash File System.

INFO: IGMP packet trapping is active for IGMP snooping, L3FILT is activated

INFO: Executing configuration script <flash:boot.cfg>

INFO: Router startup complete

login:

After the self tests are complete, the manager is given the option of forcing a mandatory boot from the flash boot block version. The following message is displayed on the terminal connected to the console port (asyn0) and the router pauses:

Force EPROM download (Y)?

If a key is not pressed within a few seconds, the start-up process continues and all steps in the start-up sequence are executed. Pressing selected keys on the terminal immediately after the “Force EPROM download” message is

C613-03087-00 Rev E

Page 34
Image 34
Allied Telesis AR700 Series manual Force Eprom download Y?

AR700 Series specifications

The Allied Telesis AR700 Series represents a robust line of edge routers engineered for high-performance networking. These devices are aimed at delivering versatility and scalability, catering to the needs of various organizations, whether small businesses or larger enterprises. Known for their reliability and advanced features, the AR700 Series stands out as a compelling option for organizations seeking to enhance their network infrastructure.

One of the standout features of the AR700 Series is its support for advanced routing protocols. The routers are capable of handling various protocols such as OSPF, BGP, and RIP, ensuring seamless integration within diverse network environments. This capability allows organizations to efficiently manage their routing needs, optimizing data flow for enhanced performance.

In addition to its routing protocols, the AR700 Series supports powerful Quality of Service (QoS) features. This technology prioritizes network traffic based on specific requirements, ensuring that vital applications receive the necessary bandwidth. This is particularly important for businesses that rely on real-time services such as video conferencing or voice over IP (VoIP), where uninterrupted service is critical.

The AR700 Series is also equipped with advanced security features to safeguard against cyber threats. With built-in firewall capabilities, VPN support, and traffic filtering, these routers help protect sensitive data from unauthorized access and attacks. Additionally, the ability to implement VLANs (Virtual Local Area Networks) further enhances the security and manageability of the network.

Scalability is a key characteristic of the AR700 Series. Organizations can easily expand their network capabilities as they grow, with support for various interface modules. This flexibility enables businesses to adapt their infrastructure without the need for complete overhauls, making it a cost-effective solution in the long run.

Management and monitoring of the AR700 Series are also streamlined, thanks to user-friendly interfaces and comprehensive management tools. IT teams can efficiently configure, monitor, and troubleshoot the network, ensuring optimal performance and reducing downtime.

In summary, the Allied Telesis AR700 Series routers combine advanced routing capabilities, robust security features, and scalable designs to meet the evolving needs of modern networks. With support for QoS, versatile protocols, and easy management, these devices are well-equipped to handle the demands of today's data-driven environments, making them an excellent choice for organizations aiming to improve their network performance and security.