Allied Telesis AR44xS, AR750S-DP manual Module Level, ASYN, Log

Features in 281-01 19

CR Module Level Description

AR400

AR7x5

AR750S / AR770S

Rapier i

AT-8800

AT-8600

AT-8700XL

AT-8948 / x900-48

AT-9900

AT-9800

CR00012846	ASYN, Log	2	The following issues occurred with sending log messages to an asynchronous
			port:
			■ The log messages output on an asynchronous port were corrupt.
			■ When log messages were output to an asynchronous port, that port was
			(correctly) locked. However, the port remained locked after the asynchronous
			log output definition was destroyed, and after the log output's destination
			was changed from asynchronous to something else.
			■ It was possible for a user to change the log output destination to an
			asynchronous port while the user was logged into the asynchronous port. This
			resulted in the user losing access to the command line interface.
			■ It was possible to create a log output definition with an asynchronous port as
			the destination even when another user was logged into that asynchronous
			port. This resulted in the other user losing access to the command line
			interface.
			■ If a user changed the log output destination to an asynchronous port and
			specified invalid parameters in the command, an error message was displayed
			but the new output destination was saved anyway.
			■ The set command allowed a user to specify an asynchronous port as the
			destination without specifying the asynchronous port number. The number
			defaulted to asyn0, which may not have been the desired port.
			These issues have been resolved.
CR00012855	Core	2	If the switch was rebooted at a time when there was a high level of packet traffic
			between the switch ports and the switch CPU, then during the reboot process it
			was possible for RAM test errors to occur.
			This issue has been resolved.

Y Y Y Y Y Y Y Y Y Y

- - - - - - - Y Y -

Version 281-02

C613-10482-00 REV B