Features in 281-01 28
Version 281-02
C613-10482-00 REV B
CR00012270 Remote Telnet 4 The “?” help description for the enable command stated that the parameter
rtelnet would “Disable the use of remote telnet to control an asyn port”.
This issue has been resolved. The query now states that the command enable
rtelnet enables remote telnet.
YYYY------
CR00012581 PPP 4 Output of the command show ppp idletimer did not display the PPP interface
name.
This issue has been resolved.
YYYYY- - YYY
CR00012655 GUI 4 The web-based Graphical User Interface (GUI) did not display software QoS
counters.
This issue has been resolved. The counters now display correctly. To access them,
select Diagnostics in the left-hand menu.
YYYY------
CR00012755 Install,
Stacking
4If the local comma nd show config dynamic was entered as a host-directed
command, the switch gave an incorrect error message.
This issue has been resolved. If you attempt to direct show config dynamic to
a host, the switch now responds with the message “Command is local, do not
use host direction”.
---YYYYYY-
CR00012774 IP Gateway,
TCP
4In an unusual network configuration where the IP subnet on one interface was a
subset of that on another interface, it was possible for the results of a trace route
to show erroneous information.
This issue has been resolved. A search for an interface using an address within
the interface's subnet now finds the most specific match for the address.
YYYYYYYYYY
CR00012824 GUI 4 Internet Explorer did not display the switch trunking summary page correctly. If
the user selected a trunk group, the radio button displayed a grey image, instead
of displaying a black dot inside a circle. This was only a display issue—the GUI
acted on the selected trunk group correctly.
This issue has been resolved.
---YYYYYYY
CR Module Level Description
AR400
AR7x5
AR750S / AR770S
Rapier i
AT-880 0
AT-860 0
AT-8700XL
AT-8948 / x900-48
AT-990 0
AT-980 0