Allied Telesis AR44xS, AR750S-DP manual Pim, Vlan

Features in 281-02 3

Features in 281-02

Software Maintenance Version 281-02 includes the resolved issues and enhancements in the following tables. In the tables, for each product series:

■“Y” in a white column indicates that the resolution is available in Version 281-02 for that product series.

■“-” in a white column indicates that the issue did not apply to that product series.

■a grey-shaded column indicates that Version 281-02 was not released on that product series.

Level 1

CR	Module	Level	Description	AR400	AR7x5	AR750S / AR770S	Rapier i	AT-8800	AT-8600	AT-8700XL	AT-8948 / x900-48	AT-9900	AT-9800
CR00006040	PIM 6	1	For PIM on IPv6, if the interface that was being used as the BSR candidate address	Y	-	Y	-	-	-	-	-	-	-
			went down, the network occasionally did not re-elect a BSR and the RPs in a
			timely manner. This could cause the router or switch to reboot.
			This issue has been resolved.
CR00007273	Switch	1	If a user created a configuration file that contained port trunk settings before	-	-	-	-	-	Y	-	-	-	-
			VLAN port settings, then a loop occurred when the switch rebooted with this
			configuration.
			This issue has been resolved.
CR00013457	VLAN	1	When ports were added to a currently-disabled RSTP domain, the ports could	-	-	-	-	-	Y	-	-	-	-
			start to discard packets (because their STP state was set to Discarding).
			This issue has been resolved. When ports are added to a disabled RSTP domain,
			they remain in a Forwarding state.
CR00013492	OSPF	1	When route filters (made with the command add ip route filter) were used to	Y	-	Y	-	-	Y	-	-	-	-
			filter OSPF routes, it was possible for OSPF to constantly remove and re-create an
			AS-External LSA. This could prevent OSPF sessions from establishing.
			This issue has been resolved.

Version 281-02

C613-10482-00 REV B