Allied Telesis AR44xS, AR750S-DP manual Igmp, Core, File, Atm

							Features in 281-02							5
CR	Module	Level	Description	AR400	AR7x5	AR750S / AR770S		Rapier i	AT-8800	AT-8600	AT-8700XL	AT-8948 / x900-48	AT-9900	AT-9800
CR00012476	IGMP	2	If IGMP snooping was enabled but IGMP was not enabled, the snooper behaved	Y	-	Y		-	-	Y	-	-	-	-
			as if IGMP snooping fast leave had been enabled even when it had not been. This
			meant that as soon as the snooper received a Leave message, the port left the
			group.
			This issue has been resolved. Note that fast leave is disabled by default.
CR00012657	STP	2	When STP was operating with a large number of VLANs in the same STP region,	-	-	-		-	-	Y	-	-	-	-
			the switch sometimes rebooted while processing topology change notifications
			(TCNs).
			This issue has been resolved.
CR00012741	Core, File,	2	The command create config=filename set did not copy the configuration file	-	-	-		-	-	Y	-	-	-	-
	Stack		to all switches in the stack, but only saved the file onto the current switch.
			This issue has been resolved.
CR00013081	Switch, STP	2	When STP was enabled on ports in a trunk group, the non-master ports did not	-	-	-		-	-	Y	-	-	-	-
			have the same state as the master port in the switch’s hardware STG table. This
			could, on rare occasions, create a broadcast storm.
			This issue has been resolved. All ports in a trunk group follow the master port in
			the hardware STG table.
CR00013128	ATM	2	When connected to some types of DSLAMs, the router could reboot due to a	Y	-	-		-	-	-	-	-	-	-
			reception error on the SHDSL EOC channel.
			This issue has been resolved.

Version 281-02

C613-10482-00 REV B