Transferring Data to a PC, Tip | Olympus DS-3000 specification

Notes

•When a SmartMedia card is formatted, all the stored data, including locked files, is erased.

•A SmartMedia card with a write-protect seal attached to it cannot be formatted (☞ P.7).

•After formatting a SmartMedia card, the display will show “NEW FILE”.

Never use any SmartMedia card other than one that has been formatted with this unit or with a CAMEDIA series Olympus digital camera.

Other SmartMedia cards may not perform as expected.

Transferring Data to a PC

This recorder is equipped with a USB terminal to enable recorded voice data to be transferred to a PC. For more details on how to transfer data and voice recognition software, refer to the supplied DSS Player Pro manual.

	PC		Formatting
	USB connector		Formatting
	USB cable
	To PC’s	USB terminal
		USB terminal	SmartMedia
	Stop the recorder before plugging in the USB		SmartMedia
	Stop the recorder before plugging in the USB
	cable. Do not use the AC adapter when
	connecting the recorder to the USB port. The
	USB port delivers the required power to the
	recorder.		Transferring
	transferred from the SmartMedia card to a PC via a		Transferring
	Tip
	When the SmartMedia card is ejected, data can be
	number of ways. See Page 54 for optional		Data
	accessories to download SmartMedia through your		Data
	PCMCIA, USB, or Floppy Disk drives.		to
	PCMCIA, USB, or Floppy Disk drives.		aPC
			aPC

47

Image 47

Olympus DS-3000 manual Transferring Data to a PC, Other SmartMedia cards may not perform as expected, Tip

Contents

DS-3000 For Safe Correct Usage General Precautions Noise, heat, smoke, or a burning odor BatteriesAC Adapter Case Main Features Table of Contents Audio Recording Format What is SmartMedia?Memory Size SP Mode LP Mode SmartMedia Write-protect SmartMedia Identification of Parts Display LCD Panel Inserting Batteries Always stop recording before connection Using the AC AdapterReplacing Batteries Insert the SmartMedia Set the POWER/LOCK switch toInserting and Ejecting SmartMedia cards Inserting SmartMedia cards Ejecting SmartMedia cards Set the POWER/LOCK switch to OFFSmartMedia inserted fully into the slot SmartMedia not inserted fully into the slot Press the Stop button to end Setting Time/DateTime/Date Screen Repeat steps 1 and 2 to set the time and date Setting Time/Date New Recording Recording Append recording Pause RecordingTo instantly review a recording Quick review Listening While Audio Is Recorded Recording Monitor Press the Stop button to stop overwriting Record/play indicator lamp glows redOverwrite Recording Press the REC/SET button to start overwriting Recording Insert Recording Press the REC/SET button again Insert recording resumes Microphone SensitivityPause Insert Recording Resume Insert Recording Display Recording ModesPress the FOLDER/MENU button for 1 second or longer You want to play PlayingPress the FOLDER/MENU button to Choose a folder Playback Functions Canceling Playback To continuously skip backward Canceling Fast PlaybackCanceling a Cue To skip backward Erasing One File at a Time Erasing ALL ERASE? flashes on the display for 8 seconds Erase All Files from a Folder To Partially Erase a File Press the Erase button once again High Low Using the Variable Control Voice Actuator Vcva Press the FF/+ or REW/- button to choose between on and OFF File locking setup process beginsLocking Files Press the REC/SET button Press the Erase button while Index MarksClearing an Index Mark Play the file with the index mark you want to clear P.23 Menu opens P.50 System SoundsFor 1 second or longer Until Beep flashes on On Enables alarm playback OFF Disables alarm playback Alarm Playback FunctionAlarm playback setup process begins Minute indicator flashes After transfer Moving Files Across FoldersRecorded file can be transferred from one Folder to another File is moved Example Assigning Folder NamesPress the REC/SET button to accept the chosen folder Advance the input position Press the FF/+ or REW/- button to choose characters To Set a Priority Level for an Existing File Setting Priority Levels Priority Normal is displayed To Set a Priority for a New FilePress the NEW button New file is created Author ID appears on the display Setting Job DataSetting an Author ID Open the menu P Index button Lets you insert one space PositionNEW button Acts as a backspace Erase button Appears on the display with the first character flashing Setting a Work TypeIf you select a Type from the list, go to step Press the REC/SET button. The current Manual Work Type Available characters are 0 to 9, a to Z, and space Press the FF/+ or REW/- button to choose YES? Formatting SmartMedia Tip Transferring Data to a PCOther SmartMedia cards may not perform as expected Stop the recorder before plugging in the USB Shows on the display Dealer Option Items ResetWhen the recorder is in hold mode, the time Hold Training your PC for Voice Recognition Press the FOLDER/MENU button during playing Menu List Message Meaning Explanation Alarm Message List Action TroubleshootingSymptom Probable cause Overall frequency response Specifications Accessories optional Technical Assistance And Support Address Canadian RFIModel Number DS-3000 Trade Name Responsible Party P2-2887-01