Chapter 5: Setting Advanced Properties

WOL Speed

The WOL Speed property sets the speed at which the network adapter connects to the network while the adapter is in Wake on LAN (WOL) mode. On Windows 2008 R2, Windows Vista, and Windows 7 systems, the default speed for WOL mode is 100 Mb. This is the only speed available for an AT-2900 Series adapter running the Windows 2008 R2, Windows Vista, and Windows 7 operating systems.

The WOL speed is limited to 100 Mb due to power limitations on the PCI bus. The WOL feature is supported only on copper Gigabit NICs where the speed must be reduced from 1 Gb to 100 Mb for the NIC power consumption to be below the maximum power provided by the PCI bus.

On the Windows Server 2003 or Windows XP systems, this property is available on the AT-2972/T2 adapter only. By default, the WOL Speed property is set to Auto. However, there are several additional settings available.

To specify the WOL speed on a Windows Server 2003 or Windows XP system, perform the following procedure:

1.For Windows Server 2003 and Windows XP systems, access the System Properties Dialog Box. See “Modifying Configuration Properties” on page 39.

2.Click the Advanced tab.

The Advanced tab is shown in Figure 21 on page 56.

3.From the Properties list, select WOL Speed.

4.From the Values list, select one of the following:

10 Mb. Sets the speed to 10 Mbit/s. This is the network speed when the system is in a standby mode awaiting a wake-up frame.

100 Mb. Sets the speed to 100 Mbit/s.

Auto (default). Sets the speed for optimum network connection.

5.Click OK.

6.If prompted to restart your computer, click Yes.

Although it is not necessary to reboot the system for new adapter properties to take effect, rebooting is recommended to reinitialize all registers.

7.Verify that the adapter port LEDs operate as described in “LEDs” on page 16.

72

Page 71 Page 73
Page 72
Image 72
Allied Telesis AT-2916LX10/LC, AT-2972LX10/LC manual WOL Speed
Page 71 Page 73

AT-2916LX10/LC, AT-2972LX10/LC specifications

Allied Telesis has long been recognized for its commitment to delivering high-performance networking solutions, and the AT-2972LX10/LC and AT-2916LX10/LC models exemplify this tradition of excellence. These products are designed to meet the demanding requirements of modern businesses looking to enhance their network infrastructure with reliable and efficient connectivity options.

The AT-2972LX10/LC is a media converter that features two SFP (Small Form-factor Pluggable) slots, enabling users to connect to a variety of fiber optic networks. It supports a range of optical transceivers, providing flexibility in network design to suit different distance and bandwidth requirements. This media converter is particularly effective in extending the reach of Ethernet networks, capable of transmitting data up to 80 kilometers through single-mode fiber. This makes it an ideal choice for organizations with geographically dispersed locations needing robust connectivity.

On the other hand, the AT-2916LX10/LC is a layer 2 switch tailored for small to medium-sized businesses. It is equipped with 16 10/100/1000Mbps Gigabit Ethernet ports, ensuring that high-speed data transfer and efficient bandwidth utilization can be achieved. Additionally, it features advanced quality of service (QoS) capabilities that prioritize critical data traffic, ensuring that high-priority applications function smoothly without disruption.

Both models utilize advanced technologies that enhance performance and reliability. With support for MAC address learning, auto-negotiation, and full-duplex transmission, these devices adapt seamlessly to various network conditions. They are compliant with IEEE standards, ensuring interoperability with a wide range of networking equipment. Moreover, they offer extensive management features, including SNMP support for proactive monitoring and diagnostics, enabling network administrators to maintain optimal performance and swiftly address any potential issues.

The build quality of these devices also reflects Allied Telesis' dedication to reliability. The AT-2972LX10/LC and AT-2916LX10/LC are designed to operate in diverse environmental conditions, making them suited for deployment in both office and industrial settings. Furthermore, they incorporate energy-efficient designs that reduce power consumption without compromising performance, aligning with the increasing demand for sustainable technology solutions.

In summary, the Allied Telesis AT-2972LX10/LC and AT-2916LX10/LC are highly effective networking solutions that cater to businesses looking to optimize their connectivity. With their comprehensive features, support for advanced technologies, and commitment to reliable performance, these devices are well-equipped to meet the challenges of today’s networking landscape. They represent a strategic investment for any organization aiming for enhanced communications and operational efficiency.
Top Page Image Contents