Allied Telesis AT-2973SX, AT-2973T, AT-2973T/4, AT-VNC10S - page 151

AT-2973SX, AT-2973T, AT-2973T/4, and AT-VNC10S Adapters Installation and User’s Guide
151
Note
This does not include an unattended installation when performed
from a CD-ROM.
Note
The path shown in OemPnpDriversPath can be appended with the
path to other applicable drivers.
For an unattended installation, place the Broadcom NetXtreme II driver
files in the $OEM$\$1\Drivers\NIC directory. For Sysprep, the drivers are
located in Drivers\NIC at the root of the system drive. The Broadcom
NetXtreme II driver files are listed below according to the operating system
to be installed:
Windows Server 2003 (ia32): bxvbd.inf, bxvbdx.sys, bxvbd.cat,
bxnd.inf, bxnd.cat, bxnd52x.sys, bxndcox.dll, bxdiag.cat, bxdiag.inf,
bxdiagx.sys, wdfcoinstaller01005.dll, and wUDFUpdate_01005.dll
Windows Server 2003 (x64): bxvbd.inf, bxvbda.sys, bxvbd.cat,
bxnd.inf, bxnd.cat, bxnd52a.sys, bxndcoa.dll, bxdiag.cat, bxdiag.inf,
bxdiaga.sys, wdfcoinstaller01005.dll, and wUDFUpdate_01005.dll
When applying network properties through an answer file for a NetXtreme
II device where the PnP iD is the identifier, as follows:
For a BCM5709C NetXtreme II GigE - InfId =
"b06bdrv\l2nd&pci_163914e4"
For a BCM5709S Netxtreme II GigE - InfId =
"b06bdrv\l2nd&pci_163a14e4"
Currently, the PCI location (PCI bus, device, and function numbers)
method is not supported for the NetXtreme II device as an identifier or the
adapter in the answer file due to a limitation with the Windows operating
system.