Allied Telesis AT-2973SX, AT-2973T, AT-2973T/4, AT-VNC10S - page 69

AT-2973SX, AT-2973T, AT-2973T/4, and AT-VNC10S Adapters Installation and User’s Guide
69
3. Install the newly built package which includes the driver and man
page:
rpm -ivh RPMS/i386/bnx2-
version .arch.rpm
If you are installing over an existing distribution that may already
contain an older version of the driver, the —force option is needed.
Depending on the kernel, the driver is installed to one of the following
paths:
2.4.x kernels
/lib/modules/kernel_version/kernel/drivers/net/
bnx2.o
2.6.x kernels
/lib/modules/kernel_version/kernel/drivers/net/
bnx2.ko
For the bnx2i driver, the driver is installed on one of the following paths:
– 2.6.16 kernels and newer (bnx2 driver)
/lib/modules/kernel_version/kernel/drivers/
net/bnx2.ko
/lib/modules/kernel_version/kernel/drivers/
net/cnic.ko
– 2.6.16 kernels and newer (bnx2i driver)
/lib/modules/kernel_version/kernel/drivers/
iscsi/bnx2i.ko
4. To load the driver, enter one of the following commands:
insmod bnx2
or
modprobe bnx2
5. To load the cnic driver (if applicable), enter one of the following
commands:
insmod cnic.ko
or
modprobe cnic