AT-FS708LE Installation Guide
Warranty Registration
When you finish installing the product, you should register you product by completing the enclosed warranty card and sending it in.
Troubleshooting
The following procedure should be perform after you have initially installed the unit to check to be sure that the device is operating properly. You can also perform this procedure to troubleshoot the unit in the event you experience any problems with the device.
1.Check the PWR LED. The LED should be ON. If the LED is OFF, check the following:
❑Verify that the power adapter is securely connected to the power source and to the DC connector on the front of the
❑Check to be sure that the power outlet has power by connecting another device to it.
❑Try replacing the power adapter with another power adapter.
2.Check the LNK/ACT LED for each port. The LED should be lit steady or flashing. If a LNK/ACT LED is OFF, check the following:
31
