Allied Telesis AT-GS950/16-10 manual Installing the Switch in an Equipment Rack

Chapter 2: Installation

Installing the Switch in an Equipment Rack

To install the switch in a standard 19-inch equipment rack, perform the following procedure:

1.If attached, remove the rubber feet using a flat-head screwdriver.

2.Install a bracket on one side of the switch using a Phillips screwdriver and four of the rack-mount screws included with the switch. Figure 7 and Figure 8 illustrate installing the brackets on the AT-GS950/16 and AT-GS950/24 Switches, respectively.

16

761

Figure 7. Attaching the Rack-Mount Bracket to the AT-GS950/16 Switch

23

24

743

Figure 8. Attaching the Rack-Mount Bracket to the AT-GS950/24 Switch

3.Repeat step 2 to attach the remaining bracket to the other side of the switch.

32