4. Slide the transceiver into the SFP slot until it clicks into place.
738 |
Figure 12. Inserting the SFP
5.Verify that the handle on the transceiver is in the upright position, as shown in Figure 13. This secures the transceiver and prevents it from being dislodged from the slot.
SFP Transceiver |
|
Handle | 1300 |
Figure 13. Positioning the SFP Handle in the Upright Position
6. Repeat steps 2 through 5 to install another SFP transceiver.
Note
SFP transceivers are dust sensitive. When a fiber optic cable is not installed, or when you store the SFP, always keep the plug in the optical bores. When you do remove the plug, keep it for future use.
35
