25AT-IFS802SP/POE(W)-80 User Manual
Modes Access Method Prompt Exit Method About This Mode1
User EXEC Begin a session with
your switch. switch> Enter logout
or quit.
The user commands available at
the user level are a subset of those
available at the privileged level.
Use this mode to
•Performbasictests.
•Displaysysteminformation.
Privileged
EXEC
Enter the enable
command while in
User EXEC mode.
switch# Enter disable
to exit.
The privileged command is the
advanced mode.
Use this mode to
•Displayadvancedfunctionstatus
•Saveconguration
Global
Conguration
Enterthecongure
command while in
privileged EXEC
mode.
switch
(cong)#
To exit to
privileged
EXEC mode,
enter exit or
end
Usethismodetocongurethose
parameters that are going to be
applied to your switch.
VLAN
database
Enter the vlan
database command
while in privileged
EXEC mode.
switch (vlan)#
To exit to
user EXEC
mode, enter
exit.
UsethismodetocongureVLAN-
specicparameters.
Interface
conguration
Enter the interface
of fast Ethernet
command (with a
specicinterface)
while in global
congurationmode.
switch
(cong-if)#
To exit
to global
conguration
mode, enter
exit.
To exit to
privileged
EXEC mode,
enter exit or
end.
TUsethismodetocongure
parameters for the switch and
Ethernet ports.