AT-WCU200G User’s Guide
23
Choose one of the following:
- To configure encryption on a new network profile, perform steps 2
and 3.
- To edit an existing network profile, perform steps 4 and 5.
2. Click Configuration on the side bar on the Allied Telesyn
AT-WCU200G Wireless Client Manager.
3. Click Encryption.
The Encryption tab is displayed. See Figure 18.
Figure 18 Encryption Tab
4. Configure the following fields as needed:
❑Authentication Mode: Indicates the security mode. The settings
you choose here must match the access point or wireless client
that you are connecting to. Choose from the following options:
- Open: Communicates the key across the network
- Shared: Allows communications only with other devices with
identical WEP settings.
- Auto: Automatically adjusts to the authentication mode of the
wireless client.
- WPA: Indicates WPA is used to authenticate another device.
- WPA-PSK: Indicates the WiFi Protected Access Pre-Shared key