AT-WCU200G User’s Guide

Under 802.11, a wireless station can be configured with up to four keys (the key index values are 0, 1, 2, and 3). When an access point or a wireless station transmits an encrypted message using a key that is stored in a specific key index, the transmitted message indicates the key index that was used to encrypt the message body. The receiving access point or wireless station can then retrieve the key that is stored at the key index and use it to decode the encrypted message body.

TKIP

The Temporal Key Integrity Protocol, pronounced tee-kip, is part of the IEEE 802.11i encryption standard for wireless LANs. TKIP is the next generation of WEP, the Wired Equivalency Protocol, which is used to secure 802.11 wireless LANs. TKIP provides per-packet key mixing, a message integrity check and a re-keying mechanism.

Configuring a WEP Wireless Network

Select the Wireless Networks tab in the Wireless Network Connection

Properties and highlight the appropriate wireless network in the

Available Networks window. Select Configure and then select in

Authentication.

When configuring WEP you need to decided between an Open or Shared Authentication. As described in the WEP Open and Shared Authentication when choosing an Open Authentication your system is open to attack by outside forces for this reason when implementing WEP it is recommended to use a Shared Authentication. However it is recommended to use WPA or WPA-PSK for stronger security implementation of your wireless network.

When selecting a WEP shared Authentication a five or thirteen digit key is required as explained in the WEP section, see WEP on page 36.

For non-WPA APs implementing an 802.1x security scheme, select Open or Shared Authentication and WEP Data Encryption. Then select the Authentication tab and Enable IEEE 802.1x authentication with the appropriate properties.

Configure WPA Select the Wireless Networks tab in the Wireless Network Connection Properties and highlight the appropriate wireless network in the Available Networks window. Select Configure and then select in Authentication.

37

Page 50 Page 52
Page 51
Image 51
Allied Telesis AT-WCU200G manual Configuring a WEP Wireless Network, Authentication
Page 50 Page 52

AT-WCU200G specifications

The Allied Telesis AT-WCU200G is a high-performance wireless controller designed for managing and monitoring multiple access points in a cohesive network environment. It is particularly effective for medium to large enterprises that require robust wireless solutions to support a growing number of devices and applications. The AT-WCU200G stands out due to its advanced features, which ensure seamless connectivity, scalability, and security.

One of the main features of the AT-WCU200G is its ability to manage up to 200 access points, allowing for extensive coverage in larger spaces without compromising performance. This centralized management simplifies network administration and monitoring, enabling IT teams to oversee their wireless infrastructure from a single location. The controller also supports the latest Wi-Fi standards, including 802.11ac, which provides high-speed connectivity and increased throughput for demanding applications.

In terms of technologies, the AT-WCU200G employs advanced radio resource management (RRM) techniques to optimize the performance of the network. RRM dynamically adjusts the power levels and channel assignments of access points, reducing interference and ensuring a reliable connection for all users. Additionally, the device features robust Quality of Service (QoS) capabilities, which prioritize critical applications such as voice and video traffic, ensuring consistent performance even during peak usage periods.

Security is a top priority with the AT-WCU200G, which incorporates multiple layers of protection. It supports WPA2 and WPA3 encryption protocols, ensuring that user data remains secure against unauthorized access. Moreover, it offers advanced features such as rogue access point detection and enhanced network segmentation, further safeguarding the network from potential threats.

The AT-WCU200G is also designed for easy integration into existing networks, with support for various management interfaces. It can be managed via a web-based GUI, CLI, or through SNMP, providing flexibility for network administrators. Additionally, its compatibility with Allied Telesis’ suite of wireless access points ensures a smooth deployment process.

In summary, the Allied Telesis AT-WCU200G is a powerful wireless controller that combines scalability, advanced management features, and robust security measures. Its ability to manage multiple access points efficiently ensures that organizations can provide high-quality wireless connectivity to meet the increasing demands of today’s mobile workforce.
Top Page Image Contents