AT-WCU200G User’s Guide
v
FCC Radio
Frequency
Exposure
Statement
This Wireless LAN radio device has been evaluated under FCC Bulletin
OET 65 and found compliant to the requirements as set forth in CFR 47
Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from
radio frequency devices.
FCC RF Radiation Exposure Statement: This equipment complies with
the FCC RF radiation limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC
Interference
Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the distance between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Export
Restrictions
This product or software contains encryption code that may not be
exported or transferred from the US or Canada without an approved US
Department of Commerce export license.
Safety Information
Your device contains a low power transmitter. When device is
transmitted it sends out radio frequency (RF) signal.