Allied Telesis SB251-10 manual Features in SB251-02

10 Patch Release Note

PCR: 03142 Module: SWI Level: 1

If a BIST was run at low temperatures, for example 5 or 10 degress celcius, on a G8 card, then a watchdog timer restart could occur. The switch now checks for the real course of the external interrupts that occur when running BIST.

PCR: 03148 Module: IPG Level: 3

If the Gratuitous ARP feature was enabled on an IP interface, and an ARP packet arrived, (either ARP request, or reply) that had a Target IP address that was equal to the SenderIP address, then the ARP cache was not updated with the ARP packet’s source data. This issue has been resolved.

PCR: 03191 Module: SWI Level: 1

If two line cards were inserted in quick succession, then a software restart could occasionally occur. This issue has been resolved.

PCR: 03192 Module: SWI Level: 2

When the Built-In Self Test was run, a fault would occasionally be reported which said that a MAC address was not learnt during the loopback test. The ports in the BIST loopback test now remain in loopback.

Features in SB251-02

Patch file details are listed in Table 9:

Table 9: Patch file details for Patch SB251-02.

Base Software Release File	sb-251.rez
Patch Release Date	25-Jan-2003
Compressed Patch File Name	sb251-02.paz
Compressed Patch File Size	48608 bytes

Patch SB251-02 includes all issues resolved and enhancements released in previous patches for Software Release 2.5.1, and the following enhancements:

PCR: 02553 Module: SWITCH Network affecting: No

64 bit MIB counters were not incremented or cleared for port interfaces. This issue has been resolved.

PCR: 02574 Module: DVMRP Network affecting: No

Some change actions, and the resending of prune messages were not operating correctly. This issue has been resolved.

PCR: 02582 Module: SWI Network affecting: No

Pause flow control is now disabled by default on all ports. This improves performance of the switch when it is congested.

Patch SB251-10 for Software Release 2.5.1 C613-10361-00 REV J