Patch | 3 |
Features in SB251-09
Patch file details are listed in Table 2:
Table 2: Patch file details for Patch
Base Software Release File | |
|
|
Patch Release Date | |
|
|
Compressed Patch File Name | |
|
|
Compressed Patch File Size | 100592 bytes |
|
|
Patch
PCR: 02577 Module: IPG, LOG | Level: 4 |
The ability to log MAC addresses whenever the ARP cache changes has been added. To enable this, use the command:
ENABLE IP ARP LOG
To disable it, use the command:
DISABLE IP ARP LOG
The logging of MAC addresses is disabled by default. Use the SHOW LOG command to view the MAC addresses that have been logged when the ARP cache changes.
PCR: 03295 | Module: IP | Level: 1 |
IP ARP entries were not being written to the hardware route table. This issue has been resolved.
PCR: 02518 | Module: SWI | Level: 1 |
An open issue previously recorded under this PCR number has been resolved. The first entry in the VLAN Tag table was being corrupted when a valid L2MC table entry was incorrectly written to CAM entry 0. The source of this VLAN Tag table corruption has been removed.
PCR: 03596 | Module: SWI | Level: 1 |
IPX routes that were added statically, or learned dynamically via RIP, were only added to the switch instance that the route was learned for. IPX routes are now added to all switch instances if the route is local or was added statically. Dynamically learned routes are now added to any switch instance with the same amount of CAM (or more) than the instance that the route was learned on.
PCR: 03597 | Module: IPG | Level: 1 |
The ARP table was sometimes not updated when an ARP Reply was received on a SwitchBlade port in response to an ARP Request. This issue has been resolved.
Patch
