2 | Patch Release Note |
Some of the issues addressed in this Release Note include a level number. This number reflects the importance of the issue that has been resolved. The levels are:
Level 1 This issue will cause significant interruption to network services, and there is no
Level 2 This issue will cause interruption to network service, however there is a
Level 3 This issue will seldom appear, and will cause minor inconvenience.
Level 4 This issue represents a cosmetic change and does not affect network operation.
Features in SB251-10
Patch
PCR: 03335 | Module: SWI | Level: 2 |
Broadcast Storm rate limiting was not limiting broadcast packets when these were set
PCR: 03399 | Module: STP | Level: 4 |
Enabling STP debug on a SwitchBlade led to invalid port numbers being displayed in the debug output. This issue has been resolved so that ports are correctly displayed in the board.portnumber format.
PCR: 03428 | Module: STP | Level: 2 |
Sometimes while in Rapid STP mode, a port changing its role from
Alternate to Designated or Root did not make a rapid transition to the
Forwarding state. This issue has been resolved.
PCR: 03608 | Module: SWI, STP | Level: 3 |
The DISABLE SWITCH PORT and ENABLE SWITCH PORT commands were not interacting correctly with trunk groups. This issue has been resolved so that if a port in a trunk group is disabled with the DISABLE SWITCH PORT command, the port will now be removed from its trunk group in the hardware tables. Also, enabling a disabled trunk group port now returns the port to its trunk group in the hardware tables.
PCR: 03612 | Module: SWI, STP | Level: 2 |
Rapid STP was not interacting correctly with trunk groups. This issue has been resolved.
Patch
