CONFIGURING THE WIRELESS LAN ACCESS POINT
The Wireless Access Point has an easy to use Web GUI interface for configuration. The AP can be configured through a Web Browser. A network manager can manage, control and monitor the AP from the local LAN. This section indicates how to configure the AP.
Login to the Wireless AP through WLAN
Before configuring the Wireless AP through a wireless client, make sure that the SSID, Channel and the WEP key have been configured correctly.
The default settings of the Wireless AP are: SSID: default
Channel: 6
WEP Encryption: disabled
Login
When configuring this device through the Ethernet port please ensure that your computer is set to the same IP range. For example, the default IP address of the AP is 192.168.1.100 and the manager PC should be set to 192.168.1.x (where x is a number between 1 and 254), and the default subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter the IP address http://192.168.1 .100 (the
5
