Series | Allstar Products Group J3500, 3000, 3500-P instruction

INSTALLER: Place this manual in the plastic envelope provided and permanently

attach to the wall near the pushbutton.

INSTALLATION AND OWNER’S MANUAL

3000 SERIES

Residential Vehicular Garage Door Operator

MODELS: 3000, 3500, 3500-P & J3500

107063

As of date of manufacture, meets all ANSI/UL 325 Safety Requirements for Vehicular gate operators

Serial #:

Date Installed:

Your Dealer:

READ THIS MANUAL CAREFULLY BEFORE

INSTALLATION OR USE

1

Image 1

Allstar Products Group J3500, 3000, 3500-P owner manual Series

Contents

Series Table of Contents Optional Features Product Features Tools Required Component Identification Step Assembly Instructions Adjustment Important Installation To Reduce the Risk of Severe Injury Do not Attempt Adjustment Installing the Operator High ARC Rise High ARC Rise Horizontal Line Mounting the Front Bracket One Sectional Doors and One Piece Doors with Track Mount Power Head to CeilingOne Piece Doors without Track Raise the opener Mounting straps in the slots closest to Front Door ARM Connection and Installation Mount at least 5 FT from the floor to prevent small children Connect the standard wall Push Button provided to Fastening Limit CAM to Chain Photosystem Unit is Within the Limit Marks on the Door Jamb Auxiliary EquipmentConnect the Photosystem as follows Final Alignment and Test Final Installation Installation of Radio Controls Check with Your Local Building Inspector First Operating ParametersIf the Door is ONE SECOND, and then Begin Moving Upward 104390 Warni NG Operation and Adjustment Instructions Security Switch is Garage Testing the All-Clear Photosystem Operator Wiring Diagram Series Connection Receiver First Wiring Auxiliary Equipment Installation Checklist Symptom Probable CAUSE/SOLUTION Troubleshooting GuideSolution Probable Cause Allstar Corporation Downingtown, PA