6.0 Troubleshooting

6.1Troubleshooting Table

 

Troubleshooting Table

Fault

Corrective Action

Green LED is blinking after

Verify AC power is ON. Check voltage at AC input block. Check

initial startup

AC input connector on power module.

Red LED is ON solid

Replace batteries.

Red LED is blinking

If no batteries are missing, check battery connections. Check

 

battery string connector on power module.

Both red and green LEDs are

Possible overload condition. Verify load does not exceed rated

blinking

capacity of power supply.

Low battery runtime in cold

Verify the battery heater mat is warming. Use compressed air to

weather

lower temperature. Heater should come on at 32°F (0°C). Check

 

battery heater mat connection. If battery heater mat fails to come

 

on, replace it.

Battery heater mat does not

Verify the ambient temperature is below 32ºF. Verify the voltage

heat

input rating on the battery heater mat matches the input voltage

 

select switch. Units set to 120V will not heat battery heater mats

 

rated for 240V. Units set to 240V will damage battery heater mats

 

rated for 120V input.

Power module fails to come on

Check the input voltage select switch. The power module can be

after applying 240V with the

damaged by applying 240Vac to the unit when the input voltage

voltage select switch set for

select switch is set to 120Vac. If the power module fails to

120V

function after this fault, it must be replaced.

No power to the customer

Verify the Radio and Power connector are properly connected.

connections (radio)

 

6.2Connecting to the Local Craft Port

Connect to the local Craft port using a laptop computer to view alarms sent to the radio from the MPS48-7M. The MPS48-7M sends data to the radio once every three minutes under normal conditions, and once every 30 seconds under alarm conditions. The table below lists the reported alarms. Refer to the radio manufacturer's documentation for interface protocols and necessary equipment. The serial communications protocol is available from Alpha Technologies.

Alarms

Input Voltage

Output Voltage

Output Power

Battery Voltage

Battery Temperature

Battery Current

Remaining Battery Capacity

24

021-511-B4-002, Rev. B

Page 23 Page 25
Page 24
Image 24
Alpha Vision Tech MPS48-7M Troubleshooting Table, Connecting to the Local Craft Port, Fault Corrective Action
Page 23 Page 25

MPS48-7M specifications

Alpha Vision Tech's MPS48-7M is a sophisticated multi-purpose system designed to meet the demands of modern technology applications. This device stands out in the market due to its range of impressive features, advanced technologies, and essential characteristics that cater to both industrial and commercial sectors.

One of the key features of the MPS48-7M is its cutting-edge processing power. Equipped with a high-performance multi-core processor, the system ensures rapid data processing and seamless multitasking capabilities. This means users can run multiple applications effectively without any lag, which is essential for time-sensitive operations in various industries.

The MPS48-7M also boasts an extensive connectivity suite. It supports various communication protocols such as Wi-Fi, Bluetooth, and Ethernet, enabling users to connect with different devices and networks efficiently. This flexibility facilitates the system’s integration into existing infrastructures, making it an ideal choice for organizations looking to enhance their technological setups.

Display quality is another highlight of the MPS48-7M. Featuring a high-resolution screen, it offers clear, vibrant visuals that significantly improve user interaction and experience. The touchscreen interface is intuitive and responsive, allowing users to navigate with ease and efficiency.

Security is paramount in today’s digital landscape, and Alpha Vision Tech has equipped the MPS48-7M with robust security features. These include advanced encryption methods and multi-factor authentication, ensuring that sensitive data remains protected from unauthorized access. This level of security makes the MPS48-7M suitable for applications in finance, healthcare, and other sectors that require stringent data protection measures.

Moreover, the device is designed with scalability in mind. Its architecture allows for easy upgrades and expansions, which means businesses can adapt it to their evolving needs without the need for a complete system overhaul. This future-proofing aspect is vital in a rapidly changing technological environment.

Lastly, the MPS48-7M is built with durability and energy efficiency in consideration. Its compact yet robust design makes it suitable for various environments, from bustling factory floors to office spaces. The energy-efficient components also contribute to reduced operational costs, making it a responsible choice for eco-conscious organizations.

In summary, the Alpha Vision Tech MPS48-7M combines high processing power, extensive connectivity, vibrant display capabilities, robust security features, scalability, and energy efficiency. This multifaceted system is poised to meet the diverse demands of contemporary users, making it a valuable addition to any technological arsenal.
Top Page Image Contents