Alpine 68-04123Z09-A Remote Control, Playing MP3 Files with the CD Changer Optional, 32-EN

Playing MP3 Files with the CD Changer (Optional)

If you connect a changer compatible with MP3, you can play CD- ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.

1 Press SOURCE/POWER to switch to the MP3 Changer mode.

2 Press FUNC. to activate the direct disc recall mode.

Source selection mode ↔ Audio function mode ↔ Direct disc recall mode ↔ Source selection mode

3 Select a disc (1 to 6) by touching the GlideTouch bar and sliding your finger to the left or right. Press the GlideTouch bar under the desired disc.

4 To pause playback, press -/J.

Pressing -/Jagain will resume playback.

•The unit can play discs containing both audio data and MP3 data.

•For operating MP3 with an MP3 compatible CD Changer, refer to “CD/MP3/WMA” pages 10 to 14.

Multi-Changer Selection (Optional)

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press SOURCE/POWER on this unit to activate the CD Changer mode.

Alternatively, press SOURCE on the remote control (RUE- 4202) to activate the CD Changer mode.

SOURCE

BAND

2 Press BAND on this unit or the RUE-4202 to activate the CD Changer Selection mode.

The CD Changer Selection mode remains active for a few seconds.

3 Press BAND until the desired CD Changer indicator appears on the display.

Alternatively press BAND on the Remote Control until the desired changer indicator appears on the display.

•If the selected CD Changer is not connected, the display will show “NO CHGR.”

•To operate the selected changer, see “CD/MP3/WMA” (page 10).

•For further details about the external input (AUX) when using KCA-410C, see “Setting the AUX Mode (V-Link)” on page 27.

Remote Control

Controls on Remote Control

1Source Button

Press this button to select the audio source.

2Volume Adjustment Buttons To increase the volume level: Press the L button

To decrease the volume level: Press the K button

38 Button

Radio mode: Pressing this button will select, in ascending order, stations programmed into the radio's presets as shown below.

1 → 2 ... 6 → 1

CD Changer mode: DISC Select (UP) button

Press this button to select a disc in ascending order.

MP3/WMA mode: Folder Select (UP) button. Press this button to select the folder.

MP3 compatible CD changer mode:

Folder Select (UP) / DISC Select (UP) button

Press this button to select a folder in ascending order. Press and hold this button to select a disc in ascending order.

4gDN Button

Radio mode: SEEK (DN) Button

CD mode: Press this button to go back to the beginning of the current track.

5-/JButton

Press this button to switch between the Play and Pause modes for CD.

6Audio Processor Button

Each press of the button changes the audio processor mode.

For details, refer to “Operating the Audio Processor” as shown below.

Press the button to call the external audio processor mode when the external audio processor is connected.*1

7Power Button

Press this button to turn the power on/off.

32-EN