Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury.

If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDA-9854L. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle's electrical system.

•When making connections to the vehicle's electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDA-9854L to the fuse box, make sure the fuse for the intended circuit of the CDA-9854L has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The CDA-9854L uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE: INSTALLATION TECHNICIAN: PLACE OF PURCHASE:

37-EN

Page 38 Page 40
Page 39
Image 39
Alpine 68-04123Z09-A owner manual Installation and Connections, 37-EN
Page 38 Page 40

68-04123Z09-A specifications

The Alpine 68-04123Z09-A is a premium automotive accessory, designed to enhance the audio experience within a vehicle. This model is part of Alpine's distinguished lineup of car audio products, renowned for their superior sound quality and innovative technology.

One of the standout features of the Alpine 68-04123Z09-A is its advanced sound processing capabilities. The unit comes equipped with a high-fidelity digital signal processor (DSP), which allows for precise tuning and customization of audio settings. This technology optimizes sound quality by eliminating distortion and providing a balanced audio spectrum.

Another significant characteristic of the Alpine 68-04123Z09-A is its compatibility with various audio sources. It supports Bluetooth connectivity, enabling users to stream music wirelessly from their smartphones or other devices. Furthermore, it has USB ports for easy access to digital audio files, and it can play CDs and AM/FM radio, catering to diverse listening preferences.

The display of the Alpine 68-04123Z09-A is also noteworthy. Featuring an intuitive user interface with a clear, bright touchscreen, it ensures easy navigation through menus and settings. The display is customizable, allowing users to choose different background colors and layouts to suit their personal style.

Additionally, the Alpine 68-04123Z09-A incorporates advanced equalization settings, which enable users to adjust bass, treble, and midrange frequencies. This feature is essential for those who desire a highly tailored audio experience, allowing for adjustments based on audio genre and personal taste.

Safety and convenience are also prioritized in the design of the Alpine 68-04123Z09-A. The unit often includes hands-free calling features, allowing drivers to stay connected without diverting their attention from the road. Integration with voice command systems enhances this capability, making it a more user-friendly option.

In summary, the Alpine 68-04123Z09-A stands out in the competitive world of car audio accessories. With its impressive sound processing technology, versatile compatibility, user-friendly interface, and strong emphasis on safety, it is an excellent choice for audiophiles and casual listeners alike, promising an outstanding audio experience on the road.
Top Page Image Contents