Information

In Case of Difficulty

If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Basic

No function or display.

•Vehicle's ignition is off.

-If connected following instructions, the unit will not operate with the vehicle's ignition off.

•Improper power lead connections.

-Check power lead connections.

•Blown fuse.

-Check the fuse on the battery lead of the unit; replace with the proper value if necessary.

•Internal micro-computer malfunctioned due to interference noise etc.

-Press the RESET switch with a ball-point pen or other pointed article.

Radio

Unable to receive stations.

•No antenna or open connection in cable.

-Make sure the antenna is properly connected; replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

•You are in a weak signal area.

-Make sure the tuner is in the DX mode.

•If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

-Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

•The antenna may not be the proper length.

-Make sure the antenna is fully extended; if broken, replace

the antenna with a new one.

Broadcast is noisy.

•The antenna is not the proper length.

-Extend the antenna fully; replace it if it is broken.

•The antenna is poorly grounded.

-Make sure the antenna is grounded properly at its mounting location.

CD

CD Player/Changer not functioning.

•Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to

cool.

CD playback sound is wavering.

•Moisture condensation in the CD Module.

- Allow enough time for the condensation to evaporate

(about 1 hour).

CD insertion not possible.

•A CD is already in the CD player.

-Eject the CD and remove it.

•The CD is being improperly inserted.

-Make sure the CD is being inserted following

instructions in the CD Player Operation section.

Unable to fast forward or backward the CD.

•The CD has been damaged.

- Eject the CD and discard it; using a damaged CD in your unit can cause damage to the mechanism.

CD playback sound skips due to vibration.

•Improper mounting of the unit.

-Securely re-mount the unit.

•Disc is very dirty.

-Clean the disc.

•Disc has scratches.

-Change the disc.

•The pick-up lens is dirty.

-Do not use a commercial available lens cleaner disc.

Consult your nearest ALPINE dealer.

CD playback sound skips without vibration.

•Dirty or scratched disc.

-Clean the disc; damaged disc should be replaced.

Error displays (built-in CD player only)

•Mechanical error

-Press the c button. After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest ALPINE dealer.

CD-R/CD-RW playback not possible

•Close session (finalization) has not been performed. - Perform finalization and attempt playback again.

MP3

MP3 is not played back.

•Writing error occurred. The CD format is not compatible.

-Make sure the CD has been written in a supported format. Refer to "About MP3" on pages 30-31, then rewrite in the format supported by this device.

41-EN

Page 42 Page 44
Page 43
Image 43
Alpine CDA-7897 owner manual Information, Case of Difficulty, Basic, Radio
Page 42 Page 44

CDA-7897 specifications

The Alpine CDA-7897 is a versatile and high-performance CD receiver that appeals to audiophiles and casual listeners alike. Renowned for its rich feature set and exceptional sound quality, the CDA-7897 is designed to enhance the in-car audio experience.

One of the standout features of the CDA-7897 is its direct connectivity options. The unit offers multiple inputs, including a front auxiliary input and USB connectivity for playing digital music files. This allows users to easily connect their smartphones or MP3 players directly to the receiver, ensuring that their favorite tunes are always within reach. The receiver is also compatible with Alpine's full-speed iPod connection, which allows for seamless control and playback of iPod music.

The CDA-7897 boasts impressive sound processing capabilities. Its built-in 24-bit digital-to-analog converter (DAC) offers superior audio clarity and fidelity, ensuring that even the most intricate details in music are faithfully reproduced. Additionally, the unit features extensive tuning options, including a 3-band parametric EQ and adjustable crossover settings, allowing users to customize their audio output to their liking. The included built-in amplifier provides a robust 50 watts per channel, delivering powerful sound that fills the car with rich, dynamic audio.

Another noteworthy aspect of the CDA-7897 is its sleek and user-friendly design. The receiver features a stylish front panel with a detachable faceplate for added security. The intuitive interface allows for easy navigation through menus and options, making it simple for users to adjust settings while on the road.

In terms of expandability, the CDA-7897 offers several options for enhancing your audio system. It includes preamp outputs for additional amplifiers and speakers, allowing users to build a more powerful setup over time. The unit also supports a variety of audio formats, including MP3 and WMA, ensuring playback compatibility across different music libraries.

Overall, the Alpine CDA-7897 is a feature-rich CD receiver that combines high-quality audio performance with modern connectivity options. Its blend of technology, customization, and user-friendly design solidifies its place as a top choice for car audio enthusiasts seeking an engaging listening experience. Whether cruising down the highway or parked at a gathering, the CDA-7897 delivers an impressive audio performance that elevates any journey.
Top Page Image Contents