Specifications

 

 

Controls on Remote Control (Optional)

FM TUNER SECTION

 

 

This unit can be controlled with an optional Alpine remote control.

Tuning Range

87.7 – 107.9 MHz

 

For details, consult your Alpine dealer.

Mono Usable Sensitivity

9.3 dBf (0.8 µV/75 ohms)

 

 

 

50 dB Quieting Sensitivity

13.5 dBf (1.3 µV/75 ohms)

 

Point the optional remote control transmitter at the

Alternate Channel Selectivity

80 dB

 

remote control sensor.

Signal-to-Noise Ratio

65 dB

 

 

 

Stereo Separation

35 dB

 

Remote control sensor

Capture Ratio

2.0 dB

 

 

 

 

AM TUNER SECTION

 

 

 

 

Tuning Range

530 – 1,710 kHz

 

 

 

Sensitivity (IEC Standard)

22.5 µV/27 dB

 

 

 

XM TUNER SECTION

 

 

 

 

 

 

 

 

Signal-to-Noise Ratio

85 dB

 

 

 

Stereo Separation

75 dB

 

 

 

Usable Sensitivity

-98 dBm (Satellite)

 

 

 

 

-95 dBm (Terrestrial)

 

 

 

CD PLAYER SECTION

 

 

 

 

Frequency Response

5 – 20,000 Hz (±1 dB)

 

 

 

Wow & Flutter (% WRMS)

Below measurable limits

 

 

 

Total Harmonic Distortion

0.008% (at 1 kHz)

 

 

 

Dynamic Range

95 dB (at 1 kHz)

 

 

 

Signal-to-Noise Ratio

105 dB

 

 

 

Channel Separation

85 dB (at 1 kHz)

 

 

 

PICKUP

 

 

 

 

Wave length

795 nm

 

 

 

Laser power

CLASS I

 

 

 

GENERAL

 

 

 

 

Power Requirement

14.4 V DC

 

 

 

 

(11–16 V allowable)

 

 

 

Power Output

18W RMS 4*

 

 

 

*Primary amplifier ratings per CEA-2006 Standard

Power output: measured at 4 Ohms and ≤ 1% THD+N

S/N: 80 dBA (reference: 1 W into 4 Ohms)

Maximum Pre-Output Voltage

2 V/10 k ohms

Bass

±14 dB at 60 Hz

Treble

±14 dB at 10 kHz

Weight

1.5 kg (3 lbs. 5 oz)

CHASSIS SIZE

 

Width

178 mm (7")

Height

50 mm (2")

Depth

160 mm (6-1/4")

NOSEPIECE SIZE

 

Width

170 mm (6-11/16")

Height

46 mm (1-13/16")

Depth

20 mm (25/32")

Due to continuous product improvement, specifications and design are subject to change without notice.

23-EN

Page 25
Image 25
Alpine CDA-9820XM Specifications Controls on Remote Control Optional, Point the optional remote control transmitter at