Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time, after installing the CD changer, after changing the car battery, etc.
1 Turn off the unit power.
2 Remove the detachable front panel.
3 Press RESET with a
1
RESET switch
Setting Time
1 Press DISP/TITLE 
repeatedly until the time is displayed.
For details, see "Displaying the Title/Text" (page 13).
2 Press and hold DISP/TITLE 
for at least 3 seconds while the time is displayed.
The time indication will blink.
3 Turn the Rotary encoder to adjust the hours.
4 When the hour has been adjusted, press the Rotary encoder.
5 Turn the Rotary encoder to adjust the minutes while the time indication is blinking.
The time is automatically set 5 seconds after the minute adjustment. The time can also be manually set by pressing the Rotary encoder.
•To synchronize the clock to a time signal, press and hold the Rotary encoder for at least 3 seconds after setting the “hour.” Minutes will be indicated as 00. If you press and hold the Rotary encoder for more than 3 seconds when the display shows over “30,” hours will advance.
Adjusting Volume
Turn the Rotary encoder until the desired sound is obtained.
Volume : 0 ~ 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume level by 20 dB.
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing MUTE again will bring the audio back to its previous level.
