Sound Setting
/ESC 
SOURCE/
BAND
AUDIO/RTN/A.SEL
Adjusting Bass/Treble/Balance (Between
Left and Right)/Fader (Between Front
and Rear)/Loudness/Defeat
1 Press AUDIO/RTN repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBW*1 
BASS 
TREBLE 
BAL 
FADER 
LOUD*2 
DEFEAT 
VOLUME 
SUBW
Subwoofer : 0 ~ +15
Bass level:
Treble level:
Balance : L15 ~ R15
Fader : R15 ~ F15
Loudness : ON/OFF
Defeat : ON/OFF
Volume : 0 ~ 35
•If no operation is performed for 5 seconds after selecting the SUBW, BASS, TREBLE, BAL, FADER, LOUD or DEFEAT mode, the unit automatically returns to normal mode.
*1 When the subwoofer mode is set to OFF, its level cannot be adjusted. *2 Loudness introduces a special low- and
low listening levels. This compensates for the ear’s decreased sensitivity to bass and treble sound. The function is inoperable when DEFEAT is set to ON.
2 Press 
or 
until the desired sound is obtained in each mode.
By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal preference.
1 Press and hold A.SEL for at least 2 seconds to activate the Sound Setting mode.
2 Press A.SEL repeatedly to select the BASS mode.
BASS 
TREBLE 
HPF 
BASS
Setting the Bass Center Frequency
80Hz 
100Hz 
200Hz 
60Hz 
80Hz
Emphasizes the displayed bass frequency ranges.
Setting the Bass Bandwidth
to select the desired bass bandwidth.
Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the center frequency. A narrower setting will boost only frequencies near the center frequency.
Setting the Bass Level
or 
to select the desired bass level
You can emphasize or weaken the bass level.
4 Press and hold 
/ESC for at least 2 seconds to return to normal mode.
•If no operation is performed for 15 seconds, the unit will return to normal mode automatically.
•The bass level settings will be individually memorized for each source (FM, AM, CD, etc.) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, AM, CD, etc.).
•The function is inoperable when DEFEAT is set to ON.
*1 The adjustment can also be made by pressing AUDIO/RTN. Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Loudness/Defeat” on page 12.
Setting the Treble Control
You can change the Treble Frequency emphasis to create your own tonal preference.
1 Press and hold A.SEL for at least 2 seconds to activate the Sound Setting mode.
2 Press A.SEL repeatedly to select the TREBLE mode.
BASS 
TREBLE 
HPF 
BASS
