Installation and Connections

Before installing or connecting the unit, please read the following and pages 3 and 5 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN.

Swallowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

Be sure to disconnect the cable from the (–) battery post before installing your CDE-9870. This will reduce any chance of damage to the unit in case of a short-circuit.

Be sure to connect the colour coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDE-9870 to the fuse box, make sure the fuse for the intended circuit of the CDE-9870 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your Alpine dealer.

The CDE-9870 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized Alpine dealer for assistance.

Be sure to connect the speaker (–) leads to the speaker (–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

SERIAL NUMBER:

 

 

 

 

 

 

Please record the serial number of your unit in the space provided

INSTALLATION DATE:

 

 

 

 

 

below and keep it as a permanent record. The serial number or the

INSTALLATION TECHNICIAN:

 

 

engraved serial number is located on the bottom of the unit.

PLACE OF PURCHASE:

 

 

 

 

 

 

 

 

 

 

22-EN

Page 24
Image 24
Alpine CDE-9870 owner manual 22-EN, Do not Damage Pipe or Wiring When Drilling Holes

CDE-9870 specifications

The Alpine CDE-9870 is a high-performance car stereo that epitomizes modern automotive audio technology, catering to both audiophiles and casual listeners alike. This unit combines functionality with an array of cutting-edge features designed to enhance the in-car listening experience.

One of the standout characteristics of the CDE-9870 is its compatibility with various audio formats. It supports MP3, WMA, and AAC playback, allowing users to enjoy their music in multiple formats without compromising sound quality. This flexibility is coupled with USB connectivity, enabling direct plug-and-play functionality. Users can easily connect their USB devices to play their favorite tracks or charge their devices while on the go.

The CDE-9870 also boasts a user-friendly interface, with a large, clear display and intuitive controls. The easy-to-navigate menu allows drivers to focus on the road while making adjustments to their audio settings. The unit features a customizable 3-band parametric equalizer, which provides users the opportunity to fine-tune sound output to their personal preferences, ensuring the best listening experience tailored to any genre.

In terms of connectivity, the Alpine CDE-9870 supports Bluetooth technology, facilitating hands-free calling and audio streaming. This feature promotes safety on the road by allowing drivers to take calls without removing their hands from the wheel. Moreover, the stereo comes equipped with an AUX input, catering to users who prefer to connect their devices through auxiliary cables for seamless playback.

Another important aspect of the CDE-9870 is its expandability. It features three preamp outputs, allowing for the integration of additional amplifiers or subwoofers for those looking to boost their sound system. Moreover, the unit is compatible with Alpine’s KTP-445A power pack, which provides an extra power boost to enhance clarity and output.

The Alpine CDE-9870 is designed with a sleek aesthetic, featuring a modern look that complements any vehicle's interior. Its durable construction ensures longevity, while the ergonomic design promotes ease of use. This unit not only delivers exceptional audio quality and versatility but also adds a touch of style to the driving experience.

In conclusion, the Alpine CDE-9870 represents an ideal blend of advanced technology and convenience. With its diverse feature set, superior sound quality, and stylish design, it stands out as an excellent choice for anyone looking to upgrade their car audio system. Whether you're commuting, road tripping, or just enjoying your favorite tunes, the CDE-9870 enhances your journey with superior sound performance.